MaxPark / PP-3
PP-3
PP Series – Hydraulic Parking Systems
The MaxPark PP Series offers an automated parking solution for residential buildings and commercial properties. Powered by a hydraulic drive system, it uses coordinated vertical and horizontal platform movements to position vehicles for parking and retrieval.
To further increase parking capacity, PP Series systems can be integrated with the MaxPark PFP Series, allowing the installation to make more efficient use of the available space.
PP-3Before / After
Drag the handle or use the arrow keys to compare.
PP-3 – System Overview
Developed by MaxPark, PP-3 is an automated parking system that arranges vehicle platforms across three levels. Its automatic control system coordinates vertical and horizontal platform movements to bring the selected parking space to the required access position.
Entrance-level platforms move horizontally. Upper-level platforms are raised or lowered to provide vehicle access, and top-level platforms move vertically only. Each level below the top has one fewer platform, leaving a vacant bay for repositioning during operation.
Users activate the system with an access card or a code. Once a parking space is selected, the controller automatically carries out the necessary movement sequence. To retrieve a vehicle stored on an upper level, the platforms beneath it shift sideways to create a clear path, allowing the selected platform to be lowered to the entrance level.
Technical specifications
| Specification | Value |
|---|---|
| Model | PP-3 |
| Levels | 3 |
| Lifting capacity | 2500 kg / 2000 kg |
| Available car length | 5000 mm |
| Available car width | 1850 mm |
| Available car height | 2050 mm / 1550 mm |
| Power pack | 5.5 kW hydraulic pump |
| Available voltage of power supply | 200–480 V, 3-phase, 50/60 Hz |
| Operation mode | Code & ID card |
| Operation voltage | 24 V |
| Safety lock | Anti-falling frame |
| Rising / descending time | <55 s |
| Finishing | Powder coating |
Frequently Asked Questions
1. Can the PP Series be installed outdoors?
Yes. The steel structure is finished with a protective zinc coating to improve resistance to moisture and corrosion. Optional covers can provide additional protection against rain, snow, and strong winds.
2. Is the PP Series suitable for SUVs?
The PP Series can be customized to accommodate SUVs. Please contact the MaxPark sales team to discuss the detailed requirements for your vehicles.
3. Which electrical supply is required?
The standard configuration uses a 380 V, three-phase power supply. Other voltage options can be arranged upon request to match local electrical requirements.
4. Can the system operate during a power failure?
Platform movement requires an active power supply. If power interruptions are common at the installation site, a backup generator is needed to keep the system operational.
5. Is installation by the customer possible?
For teams without previous experience installing the PP Series, MaxPark recommends on-site guidance from one of its engineers.